27:I[4298,["/_next/static/chunks/1wga-ezq2f_9u.js","/_next/static/chunks/1391uvikh1lrj.js","/_next/static/chunks/3aprs7_i0cwg_.js","/_next/static/chunks/0789jur78cll3.js","/_next/static/chunks/2magrkn65ldza.js","/_next/static/chunks/3s4um_owbis7m.js"],"TagAggregationClient"] 28:T3287,

Medium-Power Exchange Table Fiber Laser Cutting · 2000W

2000W Exchange Table Fiber Laser Cutting Machine

The 2000W Exchange Table Fiber Laser Cutting Machine from Shandong Xinhong CNC is designed for fabrication shops that need continuous production capability without the investment in a high-power machine. While the laser cuts on table A, the operator loads material on table B. When cutting completes, the shuttle tables swap automatically in under 30 seconds, and cutting resumes immediately. This 2000W model brings the productivity benefits of exchange table technology to the medium-power range - a 25-35% throughput increase compared to single-table configurations. It cuts carbon steel up to 8mm, stainless steel to 6mm, and aluminum to 5mm across a 1500×3000mm working area.

2000W

Laser Power

≤30s

Table Exchange Time

8mm

Max Carbon Steel

1500×3000

Working Area (mm)

Buyer Pain Points & Solutions

Idle time between sheet loads: On a single-table machine, cutting stops while the operator removes finished parts and loads the next sheet - typically 3-5 minutes of idle time per cycle. The exchange table system reduces this to under 30 seconds, converting idle time into productive cutting time and increasing daily throughput by 25-35%.

Single-table bottleneck in multi-shift operations: In two-shift or three-shift operations, the cumulative idle time from sheet loading can amount to 1-2 hours of lost production per shift. The exchange table eliminates this bottleneck, making it particularly valuable for shops running continuous production schedules.

Operator safety during sheet handling: On open machines, operators reach into the cutting area to remove parts and load new sheets, exposing them to residual heat and sharp edges. The exchange table moves the finished sheet to a safe loading zone outside the cutting area, keeping the operator away from the cutting zone during sheet changes.

Core Advantages

Dual shuttle exchange table - under 30 seconds - While the laser cuts on one table, the operator unloads finished parts and loads the next sheet on the other table. The shuttle mechanism swaps tables in under 30 seconds, minimizing non-cutting time. This is the same exchange table technology used on our 12000W high-power machine, scaled for the 2000W power range.

Automatic table positioning and clamping - The shuttle table auto-positions and clamps the sheet material upon arrival at the cutting zone, ensuring consistent material alignment without manual adjustment. Position sensors verify sheet placement before cutting begins.

Auto-focus cutting head with capacitive sensing - Maintains consistent focal distance across the full 1500×3000mm working area, compensating for sheet flatness deviations and reducing setup time between material changes.

CypCut nesting software with batch scheduling - Queue multiple cutting programs for sequential execution. The software manages nesting optimization across multiple sheets, maximizing material utilization and enabling unattended batch cutting when paired with the exchange table.

Schneider Electric safety interlock system - The exchange table area is protected by safety light curtains and interlocked access doors. If an operator enters the loading zone during table movement, the system stops immediately. The cutting zone remains enclosed during laser operation.

Technical Specifications

Parameter	Value
Laser Power	2000W
Laser Source	IPG / RAYCUS / GW (optional)
Working Area (per table)	1500 × 3000 mm
Table Configuration	Dual shuttle exchange
Table Exchange Time	≤ 30 seconds
Max Cutting Thickness (Carbon Steel)	8 mm
Max Cutting Thickness (Stainless Steel)	6 mm
Max Cutting Thickness (Aluminum)	5 mm
Positioning Accuracy	±0.03 mm
Repeatability	±0.02 mm
Max Cutting Speed	30 m/min (dependent on material & thickness)
Control System	Schneider Electric PLC + CypCut software
Safety System	Light curtains + interlocked doors
Cooling System	Industrial water chiller
Cutting Head	Auto-focus with capacitive sensing
Power Supply	380V, 3-phase, 50/60Hz
Machine Dimension	5200 × 2400 × 1900 mm (approx.)
Certifications	CE Certified

Application Industries

The 2000W exchange table fiber laser cutting machine is ideal for:

Multi-shift sheet metal fabrication - continuous production with minimal idle time between sheets
Automotive parts manufacturing - batch cutting of brackets, panels, and structural components
Electrical enclosure production - high-volume cutting of control panel components
Job shops with mixed orders - quick changeover between different cutting programs via batch scheduling
Furniture and hardware manufacturing - batch production of flat components with consistent quality
Machinery component fabrication - plate cutting for equipment frames and mounting plates

Why Choose Xinhong

Established manufacturer since 2005 - Shandong Xinhong CNC Technology Co., Ltd. has nearly two decades of experience building fiber laser equipment for global markets.
Proven exchange table technology - Xinhong's exchange table system is proven on 12000W high-power machines with table exchange under 60 seconds; the 2000W model brings the same technology to medium-power applications with even faster exchange times.
ISO 9001:2015 certified - Every machine is built under ISO 9001:2015 quality management and ships with CE compliance documentation.
Schneider Electric components - Control and safety systems built with CE/UL-certified Schneider Electric components.
Comprehensive after-sales support - Remote diagnostics, spare parts supply, and installation guidance for international customers.

FAQ

How does the exchange table increase productivity?

On a single-table machine, cutting stops for 3-5 minutes during each sheet change while the operator removes finished parts and loads new material. The exchange table allows the operator to load the next sheet on the idle table while the laser cuts on the active table. When cutting finishes, the tables swap in under 30 seconds. This eliminates most non-cutting time, increasing daily throughput by 25-35% compared to single-table operation.

How does this compare to the 12000W exchange table machine?

The 12000W machine is designed for high-power, thick-plate cutting (up to 35mm carbon steel) with a 2000×6000mm bed. This 2000W model targets the medium-power range - 8mm carbon steel on a 1500×3000mm bed. The exchange table technology is the same, but the 2000W model is more compact, more affordable, and better suited for fabrication shops processing thin to medium sheet metal rather than thick plate.

What safety features protect the operator during table exchange?

The loading zone is protected by safety light curtains that immediately stop table movement if an operator enters the zone. The cutting zone remains enclosed with interlocked doors during laser operation. The exchange table moves at a controlled speed with position sensors verifying clear travel before initiating the swap. The system complies with CE machinery safety requirements.

Can both tables handle different sheet sizes or materials?

Yes. Each table can be loaded with different sheet sizes (within the 1500×3000mm working area) or different materials. The CypCut software manages separate cutting programs for each table, allowing the machine to switch between material types or part programs between table exchanges without manual reconfiguration.

What is the maintenance requirement for the exchange table mechanism?

The shuttle mechanism uses linear guide rails and a rack-and-pinion drive system. Routine maintenance includes periodic lubrication of guide rails and inspection of drive components. The system is designed for continuous industrial use with Schneider Electric PLC monitoring of drive motor current and position sensor status for predictive maintenance alerts.

Need Continuous Production Without the High-Power Price?

Tell us your materials, thickness range, and production volume - we'll configure the optimal 2000W exchange table laser cutting system for your shop.

Request a Quote

29:T3277,

Medium-Power Exchange Table Fiber Laser Cutting · 2000W

2000W Exchange Table Fiber Laser Cutting Machine

2000W

Laser Power

≤30s

Table Exchange Time

8mm

Max Carbon Steel

1500×3000

Working Area (mm)

Buyer Pain Points & Solutions

Core Advantages

Technical Specifications

Parameter	Value
Laser Power	2000W
Laser Source	IPG / RAYCUS / GW (optional)
Working Area (per table)	1500 × 3000 mm
Table Configuration	Dual shuttle exchange
Table Exchange Time	≤ 30 seconds
Max Cutting Thickness (Carbon Steel)	8 mm
Max Cutting Thickness (Stainless Steel)	6 mm
Max Cutting Thickness (Aluminum)	5 mm
Positioning Accuracy	±0.03 mm
Repeatability	±0.02 mm
Max Cutting Speed	30 m/min (dependent on material & thickness)
Control System	Schneider Electric PLC + CypCut software
Safety System	Light curtains + interlocked doors
Cooling System	Industrial water chiller
Cutting Head	Auto-focus with capacitive sensing
Power Supply	380V, 3-phase, 50/60Hz
Machine Dimension	5200 × 2400 × 1900 mm (approx.)
Certifications	CE Certified

Application Industries

The 2000W exchange table fiber laser cutting machine is ideal for:

Multi-shift sheet metal fabrication - continuous production with minimal idle time between sheets
Automotive parts manufacturing - batch cutting of brackets, panels, and structural components
Electrical enclosure production - high-volume cutting of control panel components
Job shops with mixed orders - quick changeover between different cutting programs via batch scheduling
Furniture and hardware manufacturing - batch production of flat components with consistent quality
Machinery component fabrication - plate cutting for equipment frames and mounting plates

Why Choose Xinhong

Established manufacturer since 2005 - Shandong Xinhong CNC Technology Co., Ltd. has nearly two decades of experience building fiber laser equipment for global markets.
Proven exchange table technology - Xinhong's exchange table system is proven on 12000W high-power machines with table exchange under 60 seconds; the 2000W model brings the same technology to medium-power applications with even faster exchange times.
ISO 9001:2015 certified - Every machine is built under ISO 9001:2015 quality management and ships with CE compliance documentation.
Schneider Electric components - Control and safety systems built with CE/UL-certified Schneider Electric components.
Comprehensive after-sales support - Remote diagnostics, spare parts supply, and installation guidance for international customers.

FAQ

How does the exchange table increase productivity?

How does this compare to the 12000W exchange table machine?

What safety features protect the operator during table exchange?

Can both tables handle different sheet sizes or materials?

What is the maintenance requirement for the exchange table mechanism?

Need Continuous Production Without the High-Power Price?

Tell us your materials, thickness range, and production volume - we'll configure the optimal 2000W exchange table laser cutting system for your shop.

Request a Quote

6:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"CollectionPage\",\"name\":\"2000W shuttle fiber laser cutting machine\",\"description\":\"1 products tagged 2000W shuttle fiber laser cutting machine\",\"url\":\"https://www.xinhongcncmachinry.com/product-tag-2000w-shuttle-fiber-laser-cutting-machine\",\"mainEntity\":{\"@type\":\"ItemList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"url\":\"https://www.xinhongcncmachinry.com/product-2000w-exchange-table-fiber-laser-cutting-machine\",\"name\":\"2000W Exchange Table Fiber Laser Cutting Machine\"}]}}"}}],["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Products\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/products\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"2000W shuttle fiber laser cutting machine\"}]}"}}],["$","$L27",null,{"tagSlug":"2000w-shuttle-fiber-laser-cutting-machine","tagLabel":"2000W shuttle fiber laser cutting machine","products":[{"__entity":"product","id":"0db63da2-5b76-436a-bd2b-517379e32e4a","name":"2000W Exchange Table Fiber Laser Cutting Machine","slug":"2000w-exchange-table-fiber-laser-cutting-machine","categoryId":"4519294d-6e25-4e65-b74d-274e194cc78e","categoryName":"Medium-Power Fiber Laser Cutting Machines","coverImage":"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png","images":["https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png"],"alts":{"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png":"High-power exchange table fiber laser cutting machine with dual shuttle tables for continuous production"},"charCount":10571,"enoughRichness":true,"description":"$28","processedDescription":"$29","summary":"2000W exchange table fiber laser cutting machine with dual shuttle for continuous production. Cuts carbon steel to 8mm, table exchange under 30 seconds. 1500x3000mm bed, 25-35% throughput increase, CE certified.","specs":[],"brand":"","sku":"","attributes":{},"currency":"USD","priceMin":null,"priceMax":null,"minOrder":null,"tags":["exchange table fiber laser cutting machine","2000W shuttle fiber laser cutting machine","dual table fiber laser cutting machine","continuous production fiber laser cutting machine","medium power exchange table fiber laser cutting machine","2000w fiber laser cutting machine","2000w laser cutter"],"highlights":[],"seoTitle":"2000W Exchange Table Fiber Laser Cutting Machine | Xinhong CNC","seoDescription":"2000W exchange table fiber laser cutting machine with dual shuttle. Table exchange under 30s, cuts carbon steel to 8mm. 1500x3000mm bed, 25-35% throughput increase, CE certified.","seoKeywords":null,"status":"published","sortOrder":0,"isHot":false,"isRecommended":false,"aiGenerated":false,"source":"","lastQcPassed":false,"contentQualityScore":null,"contentQualityCheckedAt":null,"contentQualityActionId":null,"createdAt":"2026-08-13T19:38:30+08:00","updatedAt":"2026-08-25T17:10:45+08:00"}],"locale":"en"}]]