1b:I[4298,["/_next/static/chunks/1wga-ezq2f_9u.js","/_next/static/chunks/1391uvikh1lrj.js","/_next/static/chunks/3aprs7_i0cwg_.js","/_next/static/chunks/0789jur78cll3.js","/_next/static/chunks/2magrkn65ldza.js","/_next/static/chunks/3s4um_owbis7m.js"],"TagAggregationClient"] 1c:T29a9,

High-Power Exchange Table · 12000W

High-Power Exchange Table Fiber Laser Cutting Machine

The High-Power Exchange Table Fiber Laser Cutting Machine from Shandong Xinhong CNC is engineered for continuous, high-volume production environments where machine utilization is the top priority. Powered by a 12000W IPG/RAYCUS fiber laser source with a fully integrated dual shuttle exchange table system, it enables simultaneous cutting and sheet loading - reducing idle time between sheets to under 60 seconds. While the laser cuts on table A, the operator loads material on table B. When cutting completes, the tables swap automatically, and cutting resumes immediately. For fabricators running multi-shift operations, this machine can increase daily throughput by 30-40% compared to single-table configurations.

12000W

Laser Power

≤60s

Table Exchange Time

35mm

Max Carbon Steel

2000×6000

Working Area (mm)

Buyer Pain Points & Solutions

Idle time between sheets: On single-table machines, the laser sits idle while the operator unloads cut parts, clears the bed, and loads the next sheet - typically 5-10 minutes per sheet. The exchange table system reduces this to under 60 seconds by preparing the next sheet during cutting.

Limited throughput on multi-shift operations: Single-table machines cannot sustain high utilization rates because every sheet change interrupts cutting. The exchange table enables continuous cutting cycles, increasing daily throughput by 30-40% on the same laser power.

Operator safety during material handling: Loading and unloading sheets on a single-table machine requires working near the laser cutting area. The exchange table positions the loading zone away from the cutting enclosure, improving operator safety and allowing loading during active cutting.

Core Advantages

Dual shuttle exchange table system - Two independent cutting beds shuttle in and out of the cutting enclosure on precision rails. Automatic table exchange completes in under 60 seconds, with pneumatic clamping and positioning for repeatable sheet alignment.

IPG / RAYCUS 12000W laser source - 50,000+ hour sealed tube life. The 12kW beam cuts carbon steel to 35mm and stainless steel to 20mm, delivering the thickness range needed for heavy structural and machinery fabrication.

Auto-focus cutting head with capacitive sensing - Real-time height tracking maintains optimal focal distance across warped plates and mixed-thickness nests, ensuring consistent cut quality across every sheet.

Heavy-duty dual-drive gantry - Welded steel frame with stress relief, dual servo motors on X-axis with precision helical rack. ±0.05mm positioning accuracy, ±0.03mm repeatability.

Schneider Electric CNC with production scheduling - Modicon M241 PLC manages cutting programs, batch scheduling, and table exchange sequencing. Ethernet connectivity for remote monitoring and production data logging.

Technical Specifications

Parameter	Value
Laser Power	12000W
Laser Source	IPG / RAYCUS / GW (optional)
Max Cutting Thickness (Carbon Steel)	35mm
Max Cutting Thickness (Stainless Steel)	20mm
Max Cutting Thickness (Aluminum)	16mm
Working Area	2000 × 6000 mm
Table Type	Dual shuttle exchange (auto)
Table Exchange Time	≤ 60 seconds
Positioning Accuracy	±0.05 mm
Repeatability	±0.03 mm
Max Cutting Speed	30 m/min (depending on material and thickness)
Control System	Schneider Modicon M241 PLC
Drive System	Dual servo motor + helical rack & pinion
Cooling	Dual-temperature industrial water chiller
Power Supply	380V / 50Hz / 3-phase (customizable)
Certifications	CE Certified

Application Industries

High-volume sheet metal fabrication · Automotive parts manufacturing · Steel service centers · Structural steel fabrication · Agricultural machinery components · Heavy equipment manufacturing · Contract manufacturing and job shops · Multi-shift production facilities

Manufacturer Backing

Manufactured by Shandong Xinhong CNC Technology Co., Ltd., established in 2005, an ISO 9001:2015-certified and CE-compliant fiber laser equipment manufacturer. Xinhong's production facility is equipped with high-power laser cutting systems from 2000W to 30000W. This exchange table configuration is built on the proven 12000W platform, enhanced for continuous production. Laser sources from IPG (USA), RAYCUS, and GW. Technical documentation, operation manuals, operator training, and commissioning guidance are provided with every machine.

FAQ

How much throughput improvement can I expect with the exchange table?

The exchange table typically increases daily throughput by 30-40% compared to a single-table machine at the same laser power. The exact improvement depends on your part mix, sheet change time, and cutting program complexity. On multi-shift operations, the improvement is greater because the machine spends more of each shift in active cutting.

How long does the table exchange take?

Table exchange completes in under 60 seconds. The system automatically unclamps the finished sheet, shuttles the tables, positions the new sheet, and resumes cutting. The operator loads the next sheet on the idle table while cutting continues.

Can I upgrade my existing Xinhong machine with an exchange table?

Exchange table integration depends on your machine model and frame configuration. Contact us with your machine model and production requirements, and we'll assess whether an upgrade is feasible or recommend the optimal new configuration.

Does the exchange table affect cutting accuracy?

No. The exchange table uses precision rails and pneumatic clamping with repeatable positioning. The ±0.05mm positioning accuracy and ±0.03mm repeatability are maintained across table exchanges.

What safety features are included?

The cutting area is fully enclosed during operation. The loading zone is positioned outside the cutting enclosure, allowing safe operator access during active cutting. Safety interlocks prevent table exchange or cutting head operation when the enclosure is open.

Maximize Your Laser Cutting Throughput

Tell us your daily sheet volume, shift pattern, and material mix - we'll configure the optimal exchange table system for continuous production.

Request a Quote

1d:T2995,

High-Power Exchange Table · 12000W

High-Power Exchange Table Fiber Laser Cutting Machine

12000W

Laser Power

≤60s

Table Exchange Time

35mm

Max Carbon Steel

2000×6000

Working Area (mm)

Buyer Pain Points & Solutions

Core Advantages

Heavy-duty dual-drive gantry - Welded steel frame with stress relief, dual servo motors on X-axis with precision helical rack. ±0.05mm positioning accuracy, ±0.03mm repeatability.

Technical Specifications

Parameter	Value
Laser Power	12000W
Laser Source	IPG / RAYCUS / GW (optional)
Max Cutting Thickness (Carbon Steel)	35mm
Max Cutting Thickness (Stainless Steel)	20mm
Max Cutting Thickness (Aluminum)	16mm
Working Area	2000 × 6000 mm
Table Type	Dual shuttle exchange (auto)
Table Exchange Time	≤ 60 seconds
Positioning Accuracy	±0.05 mm
Repeatability	±0.03 mm
Max Cutting Speed	30 m/min (depending on material and thickness)
Control System	Schneider Modicon M241 PLC
Drive System	Dual servo motor + helical rack & pinion
Cooling	Dual-temperature industrial water chiller
Power Supply	380V / 50Hz / 3-phase (customizable)
Certifications	CE Certified

Application Industries

Manufacturer Backing

FAQ

How much throughput improvement can I expect with the exchange table?

How long does the table exchange take?

Can I upgrade my existing Xinhong machine with an exchange table?

Does the exchange table affect cutting accuracy?

No. The exchange table uses precision rails and pneumatic clamping with repeatable positioning. The ±0.05mm positioning accuracy and ±0.03mm repeatability are maintained across table exchanges.

What safety features are included?

Maximize Your Laser Cutting Throughput

Tell us your daily sheet volume, shift pattern, and material mix - we'll configure the optimal exchange table system for continuous production.

Request a Quote

6:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"CollectionPage\",\"name\":\"continuous production laser cutting machine\",\"description\":\"1 products tagged continuous production laser cutting machine\",\"url\":\"https://www.xinhongcncmachinry.com/product-tag-continuous-production-laser-cutting-machine\",\"mainEntity\":{\"@type\":\"ItemList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"url\":\"https://www.xinhongcncmachinry.com/product-high-power-exchange-table-fiber-laser-cutting-machine\",\"name\":\"High-Power Exchange Table Fiber Laser Cutting Machine\"}]}}"}}],["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Products\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/products\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"continuous production laser cutting machine\"}]}"}}],["$","$L1b",null,{"tagSlug":"continuous-production-laser-cutting-machine","tagLabel":"continuous production laser cutting machine","products":[{"__entity":"product","id":"33f1902a-ac49-4185-97da-457180f857f5","name":"High-Power Exchange Table Fiber Laser Cutting Machine","slug":"high-power-exchange-table-fiber-laser-cutting-machine","categoryId":"992adc1a-79a1-4264-bc9f-8b9a991c823f","categoryName":"High-Power Fiber Laser Cutting Machines","coverImage":"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png","images":["https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png"],"alts":{"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/d280d5c6151c45db885c51b29aaf844b.png":"High-power exchange table fiber laser cutting machine with dual shuttle tables for continuous production"},"charCount":8697,"enoughRichness":true,"description":"$1c","processedDescription":"$1d","summary":"12000W high-power fiber laser cutting machine with dual shuttle exchange table for continuous production. Table exchange under 60 seconds, cuts carbon steel to 35mm. 2000×6000mm bed, ±0.05mm precision, CE certified. 30-40% throughput increase.","specs":[],"brand":"","sku":"","attributes":{},"currency":"USD","priceMin":null,"priceMax":null,"minOrder":null,"tags":["exchange table fiber laser cutting machine","dual shuttle laser cutter","12000W exchange table laser","continuous production laser cutting machine","high power exchange table fiber laser cutting machine"],"highlights":[],"seoTitle":"High-Power Exchange Table Fiber Laser Cutting Machine | Xinhong CNC","seoDescription":"12000W fiber laser cutting machine with dual shuttle exchange table for continuous production. Table exchange under 60s, cuts carbon steel to 35mm, 2000x6000mm bed, CE certified. 30-40% throughput increase.","seoKeywords":"exchange table fiber laser cutting machine,dual shuttle laser cutter,12000W exchange table laser,continuous production laser cutting machine,high power exchange table fiber laser cutting machine","status":"published","sortOrder":0,"isHot":false,"isRecommended":false,"aiGenerated":false,"source":"","lastQcPassed":false,"contentQualityScore":null,"contentQualityCheckedAt":null,"contentQualityActionId":null,"createdAt":"2026-08-13T19:19:27+08:00","updatedAt":"2026-08-25T17:10:38+08:00"}],"locale":"en"}]]