24:I[4298,["/_next/static/chunks/1wga-ezq2f_9u.js","/_next/static/chunks/1391uvikh1lrj.js","/_next/static/chunks/3aprs7_i0cwg_.js","/_next/static/chunks/0789jur78cll3.js","/_next/static/chunks/2magrkn65ldza.js","/_next/static/chunks/3s4um_owbis7m.js"],"TagAggregationClient"] 25:T2bfb,

Marine Engineering Ultra-Thick Plate · 20000W

Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine

The Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine from Shandong Xinhong CNC is configured specifically for shipyards and offshore engineering fabricators processing ultra-thick steel plates. Built on a 20000W IPG/RAYCUS laser platform with a reinforced heavy-duty gantry and high-pressure nitrogen cutting system, it cuts carbon steel up to 50mm, stainless steel up to 30mm, and marine-grade alloys with the edge quality and dimensional accuracy required by classification society standards (DNV, ABS, LR, BV). The 2000×6000mm working area accommodates full-size shipyard plates without pre-cutting.

20000W

Laser Power

50mm

Max Carbon Steel

30 bar

Max Gas Pressure

2000×6000

Working Area (mm)

Buyer Pain Points & Solutions

Oxy-fuel and plasma quality limitations: Shipyard plate cutting traditionally relies on oxy-fuel and plasma for 30-50mm carbon steel - processes that leave scale, wide kerf, rounded top edges, and large heat-affected zones requiring extensive grinding before welding. The 20000W fiber beam produces narrow, square edges with minimal HAZ, dramatically reducing weld preparation time.

Classification society compliance: Marine fabrication requires cuts that meet classification society standards (DNV, ABS, LR, BV). The fiber laser's precision cutting (±0.05mm positioning, ±0.03mm repeatability) and clean edge quality support compliance with these stringent dimensional and surface standards.

Marine-grade alloy processing: Offshore engineering uses specialized alloys including duplex stainless steel and marine-grade aluminum that are challenging for traditional cutting methods. The 20kW beam with high-purity nitrogen assist gas processes these materials with bright, oxide-free edges ready for welding.

Core Advantages

IPG / RAYCUS 20000W laser source - 50,000+ hour sealed tube life. The 20kW beam delivers sufficient power density for clean, single-pass cutting of 50mm carbon steel - replacing oxy-fuel with superior edge quality and faster throughput.

30 bar high-pressure gas delivery system - Engineered for thick-plate cutting with nitrogen assist gas. High-pressure nitrogen (≥99.99%) produces bright, oxide-free edges on stainless steel and marine alloys up to 30mm. Compatible with Xinhong's PSA nitrogen generator.

Reinforced thermal management - Triple-circuit industrial water chiller with dedicated cooling for laser, optics, and cutting head. Maintains thermal stability under 20kW continuous operation for extended shipyard production shifts.

Heavy-duty dual-drive gantry for thick plates - Reinforced welded steel frame with stress relief, dual servo motors on X-axis. Engineered for the thermal and dynamic loads of 50mm plate cutting with ±0.05mm positioning accuracy.

Schneider Electric CNC with shipyard production management - Modicon M241 PLC with Ethernet for remote monitoring, batch scheduling, nesting integration, and production data logging supporting traceability requirements.

Technical Specifications

Parameter	Value
Laser Power	20000W
Laser Source	IPG / RAYCUS / GW (optional)
Max Cutting Thickness (Carbon Steel)	50mm
Max Cutting Thickness (Stainless Steel)	30mm
Max Cutting Thickness (Aluminum)	25mm
Max Cutting Thickness (Duplex Stainless)	25mm
Working Area	2000 × 6000 mm
Positioning Accuracy	±0.05 mm
Repeatability	±0.03 mm
Max Cutting Speed	30 m/min (depending on material and thickness)
Max Gas Pressure	30 bar
Control System	Schneider Modicon M241 PLC
Drive System	Dual servo motor + helical rack & pinion
Cooling	Triple-circuit industrial water chiller
Power Supply	380V / 50Hz / 3-phase (customizable)
Certifications	CE Certified

Application Industries

Shipbuilding and hull plate fabrication · Offshore platform structures · Marine engineering components · Pressure vessel and boiler manufacturing · Heavy structural steel for infrastructure · Defense and naval applications · Oil and gas pipeline and flange · Wind energy monopile and tower sections

Manufacturer Backing

Manufactured by Shandong Xinhong CNC Technology Co., Ltd., established in 2005, an ISO 9001:2015-certified and CE-compliant fiber laser equipment manufacturer. Xinhong's production facility is equipped with high-power laser cutting systems from 2000W to 30000W, serving automotive, electrical, and heavy industry sectors worldwide. This marine engineering configuration is built on the 20000W platform with specialized thick-plate cutting optimizations. Laser sources from IPG (USA), RAYCUS, and GW. Technical documentation, operation manuals, operator training, and commissioning guidance are provided with every machine.

FAQ

How does this machine differ from the standard 20000W model?

This marine engineering configuration includes a 30 bar high-pressure gas delivery system (vs 25 bar standard), triple-circuit chiller for extended thick-plate duty cycles, and specialized cutting parameters optimized for shipyard plate materials including marine-grade carbon steel and duplex stainless steel. The gantry is additionally reinforced for continuous heavy-plate processing.

Can it cut duplex stainless steel used in offshore applications?

Yes. The 20000W beam with high-purity nitrogen assist gas cuts duplex stainless steel up to 25mm with bright, oxide-free edges. Duplex steel's higher strength and viscosity compared to standard austenitic stainless require the additional beam power for clean cutting.

Does the machine support classification society requirements?

The machine's ±0.05mm positioning accuracy and clean edge quality support dimensional and surface requirements of major classification societies (DNV, ABS, LR, BV). However, final certification depends on your specific project requirements and approved welding procedures. We recommend discussing your classification requirements with our team.

What nitrogen consumption should I expect for thick-plate cutting?

Nitrogen consumption for 30-50mm plate cutting at 30 bar can be significant. We recommend pairing the machine with Xinhong's PSA nitrogen generator (99.9% purity, 10-80 m³/h) for on-site production, which typically pays for itself in 6-12 months compared to bottled nitrogen.

What support is available for shipyard installation?

Technical documentation, operation manuals, remote troubleshooting, and operator training are included. Xinhong provides installation guidance and commissioning support for shipyard environments. Contact us for service terms in your region.

Upgrade Your Shipyard Cutting Capability

Tell us your plate thicknesses, material grades, and classification requirements - we'll configure the optimal marine engineering laser system.

Request a Quote

26:T2bd7,

Marine Engineering Ultra-Thick Plate · 20000W

Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine

20000W

Laser Power

50mm

Max Carbon Steel

30 bar

Max Gas Pressure

2000×6000

Working Area (mm)

Buyer Pain Points & Solutions

Core Advantages

Technical Specifications

Parameter	Value
Laser Power	20000W
Laser Source	IPG / RAYCUS / GW (optional)
Max Cutting Thickness (Carbon Steel)	50mm
Max Cutting Thickness (Stainless Steel)	30mm
Max Cutting Thickness (Aluminum)	25mm
Max Cutting Thickness (Duplex Stainless)	25mm
Working Area	2000 × 6000 mm
Positioning Accuracy	±0.05 mm
Repeatability	±0.03 mm
Max Cutting Speed	30 m/min (depending on material and thickness)
Max Gas Pressure	30 bar
Control System	Schneider Modicon M241 PLC
Drive System	Dual servo motor + helical rack & pinion
Cooling	Triple-circuit industrial water chiller
Power Supply	380V / 50Hz / 3-phase (customizable)
Certifications	CE Certified

Application Industries

Manufacturer Backing

FAQ

How does this machine differ from the standard 20000W model?

Can it cut duplex stainless steel used in offshore applications?

Does the machine support classification society requirements?

What nitrogen consumption should I expect for thick-plate cutting?

What support is available for shipyard installation?

Upgrade Your Shipyard Cutting Capability

Tell us your plate thicknesses, material grades, and classification requirements - we'll configure the optimal marine engineering laser system.

Request a Quote

6:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"CollectionPage\",\"name\":\"shipyard laser cutting machine\",\"description\":\"1 products tagged shipyard laser cutting machine\",\"url\":\"https://www.xinhongcncmachinry.com/product-tag-shipyard-laser-cutting-machine\",\"mainEntity\":{\"@type\":\"ItemList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"url\":\"https://www.xinhongcncmachinry.com/product-marine-engineering-ultra-thick-plate-fiber-laser-cutting-machine\",\"name\":\"Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine\"}]}}"}}],["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Products\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/products\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"shipyard laser cutting machine\"}]}"}}],["$","$L24",null,{"tagSlug":"shipyard-laser-cutting-machine","tagLabel":"shipyard laser cutting machine","products":[{"__entity":"product","id":"bf21031f-3e71-486a-a0d8-9f6486aa2d38","name":"Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine","slug":"marine-engineering-ultra-thick-plate-fiber-laser-cutting-machine","categoryId":"992adc1a-79a1-4264-bc9f-8b9a991c823f","categoryName":"High-Power Fiber Laser Cutting Machines","coverImage":"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/f19b22b4e15c4ea2b93a45d48c73dc71.png","images":["https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/f19b22b4e15c4ea2b93a45d48c73dc71.png"],"alts":{"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/f19b22b4e15c4ea2b93a45d48c73dc71.png":"Marine engineering ultra-thick plate fiber laser cutting machine cutting 50mm steel plate in shipyard"},"charCount":9275,"enoughRichness":true,"description":"$25","processedDescription":"$26","summary":"20000W marine engineering ultra-thick plate fiber laser cutting machine for shipyards and offshore fabrication. Cuts carbon steel to 50mm, stainless to 30mm with 30 bar gas pressure. 2000×6000mm bed, ±0.05mm precision, CE certified.","specs":[],"brand":"","sku":"","attributes":{},"currency":"USD","priceMin":null,"priceMax":null,"minOrder":null,"tags":["marine engineering fiber laser cutting machine","ultra thick plate laser cutting","shipyard laser cutting machine","50mm carbon steel laser cutter","offshore structure laser cutting machine"],"highlights":[],"seoTitle":"Marine Engineering Ultra-Thick Plate Fiber Laser Cutting Machine | Xinhong CNC","seoDescription":"20000W marine engineering ultra-thick plate fiber laser cutting machine. Cuts carbon steel to 50mm, stainless steel to 30mm. 30 bar gas pressure, 2000x6000mm bed, CE certified for shipyard applications.","seoKeywords":"marine engineering fiber laser cutting machine,ultra thick plate laser cutting,shipyard laser cutting machine,50mm carbon steel laser cutter,offshore structure laser cutting machine","status":"published","sortOrder":0,"isHot":false,"isRecommended":false,"aiGenerated":false,"source":"","lastQcPassed":false,"contentQualityScore":null,"contentQualityCheckedAt":null,"contentQualityActionId":null,"createdAt":"2026-08-13T19:17:37+08:00","updatedAt":"2026-08-25T17:10:44+08:00"}],"locale":"en"}]]