23:I[4298,["/_next/static/chunks/1wga-ezq2f_9u.js","/_next/static/chunks/1391uvikh1lrj.js","/_next/static/chunks/3aprs7_i0cwg_.js","/_next/static/chunks/0789jur78cll3.js","/_next/static/chunks/2magrkn65ldza.js","/_next/static/chunks/3s4um_owbis7m.js"],"TagAggregationClient"] 24:T2a6c,

Precision Mold & Tool Repair · Fiber Laser Welding

Precision Mold Repair Fiber Laser Welding Machine

Mold and tool maintenance shops face a persistent challenge: repairing expensive injection molds, stamping dies, and precision tooling without causing thermal distortion or metallurgical damage to the surrounding material. Traditional TIG welding deposits too much heat, warping critical tolerances and requiring extensive post-weld machining. The Precision Mold Repair Fiber Laser Welding Machine from Shandong Xinhong CNC delivers controlled, low-heat-input laser welding specifically engineered for mold and die restoration - enabling micro-welding of cracks, edges, and worn surfaces with a heat-affected zone under 0.2mm.

2000W

Laser Power

0.2mm

HAZ Width

±0.02

Positioning (mm)

50×

Magnification

Buyer Pain Points & Solutions

Thermal distortion on precision molds: TIG welding on polished mold cavities causes heat warpage that destroys dimensional accuracy. The fiber laser's concentrated beam deposits energy only at the weld point, keeping the HAZ under 0.2mm and preserving surrounding tolerances.

Post-weld grinding and polishing time: Arc welds leave raised beads requiring extensive grinding. The laser produces flush or near-flush welds with minimal reinforcement, reducing polishing time by 60-80% compared to TIG repair.

Repairing hardened tool steel: D2, H13, and S7 tool steels are prone to cracking with conventional welding. The laser's precise heat control and fast cooling rate minimize cracking risk on hardened tool steel repair.

Core Advantages

Microscope-guided precision welding - A 50x stereo microscope with crosshair reticle provides the operator a magnified view of the weld zone, enabling precise placement of weld material on cracks as fine as 0.1mm wide. The laser spot diameter is adjustable from 0.2mm to 2.0mm.

Adjustable pulse energy and duration - Pulse energy from 0.1J to 50J with pulse duration from 0.1ms to 20ms. This granularity allows welding of thin edges without burn-through and building up material on worn surfaces layer by layer.

Argon-shielded weld pool - Integrated argon shielding gas nozzle protects the weld pool from oxidation, producing bright, clean welds on tool steel, stainless steel, and aluminum alloy molds without post-weld discoloration.

Wire feeder for build-up welding - A precision wire feeder delivers 0.6-1.2mm filler wire for building up worn surfaces, repairing chipped edges, and restoring original dimensions. Wire feed speed is synchronized with pulse frequency.

Water-cooled laser source for continuous operation - The 2000W fiber laser source with water circulation cooling maintains stable output through 8+ hour repair shifts. The system stores 100+ weld parameter profiles for different tool steel grades and repair types.

Technical Specifications

Parameter	Value
Laser Power	2000W (configurable 1000W-3000W)
Laser Source	IPG / RAYCUS fiber laser
Wavelength	1064 nm
Pulse Energy Range	0.1J - 50J
Pulse Duration	0.1ms - 20ms
Spot Diameter	0.2mm - 2.0mm (adjustable)
Heat-Affected Zone	< 0.2mm
Positioning Accuracy	±0.02mm
Microscope Magnification	50x stereo with crosshair
Wire Feeder	0.6-1.2mm filler wire, synchronized feed
Cooling System	Water circulation
Parameter Memory	100+ profiles
Shielding Gas	Argon (integrated nozzle)
Power Supply	220V, single-phase, 50/60Hz
Certifications	CE compliant

Application Industries

The precision mold repair laser welding machine is widely used for:

Injection mold repair - repairing cracks, worn cavities, and damaged parting lines on plastic injection molds
Stamping die maintenance - rebuilding cutting edges and repairing chips on progressive stamping dies
Die-casting tool restoration - repairing heat checking cracks and erosion on aluminum die-casting tooling
Precision tool repair - repairing cutting tools, gauges, and fixtures made from hardened tool steel
Jewelry and dental welding - fine welding of precious metals and small components

Why Choose Xinhong

Established manufacturer since 2005 - Nearly two decades of fiber laser equipment R&D and production experience.
Genuine IPG/RAYCUS laser sources - 35,000+ hour service life with consistent beam quality for precision micro-welding.
ISO 9001:2015 certified - Every machine is built under ISO 9001:2015 quality management and ships with CE compliance documentation.
Comprehensive after-sales support - Remote diagnostics, spare parts supply, and operator training for international customers.

FAQ

What tool steel grades can this machine repair?

The machine is suitable for repairing D2, H13, S7, A2, P20, and other common tool steels used in mold and die making. The adjustable pulse energy and duration allow optimization for each grade's metallurgical characteristics. Contact us with your specific tool steel grade for recommended weld parameters.

How thin can the weld be?

The minimum spot diameter is 0.2mm, allowing welding of cracks as fine as 0.1mm wide. Pulse energy can be reduced to 0.1J for welding extremely thin edges without burn-through. The microscope guidance system ensures precise placement at this scale.

Can the machine build up worn surfaces?

Yes. The precision wire feeder delivers 0.6-1.2mm filler wire synchronized with the laser pulse, building up worn surfaces layer by layer. This restores original dimensions on worn mold cavities and damaged die edges without excessive heat input.

What training is required for operators?

Basic mold repair laser welding can be learned in 2-3 days. The microscope-based operation is intuitive for operators familiar with precision work. We provide comprehensive training manuals, video tutorials, and remote support. Advanced techniques for complex repairs require additional practice.

Is the machine CE certified?

Yes. Xinhong's fiber laser welding machines are CE compliant for European industrial safety standards. Full compliance documentation is provided with every machine.

Need Precision Mold Repair Capability?

Tell us your mold types, tool steel grades, and typical repair scenarios - we'll configure the optimal mold repair laser welding system for your toolroom.

Request a Quote

25:T2a49,

Precision Mold & Tool Repair · Fiber Laser Welding

Precision Mold Repair Fiber Laser Welding Machine

2000W

Laser Power

0.2mm

HAZ Width

±0.02

Positioning (mm)

50×

Magnification

Buyer Pain Points & Solutions

Core Advantages

Technical Specifications

Parameter	Value
Laser Power	2000W (configurable 1000W-3000W)
Laser Source	IPG / RAYCUS fiber laser
Wavelength	1064 nm
Pulse Energy Range	0.1J - 50J
Pulse Duration	0.1ms - 20ms
Spot Diameter	0.2mm - 2.0mm (adjustable)
Heat-Affected Zone	< 0.2mm
Positioning Accuracy	±0.02mm
Microscope Magnification	50x stereo with crosshair
Wire Feeder	0.6-1.2mm filler wire, synchronized feed
Cooling System	Water circulation
Parameter Memory	100+ profiles
Shielding Gas	Argon (integrated nozzle)
Power Supply	220V, single-phase, 50/60Hz
Certifications	CE compliant

Application Industries

The precision mold repair laser welding machine is widely used for:

Injection mold repair - repairing cracks, worn cavities, and damaged parting lines on plastic injection molds
Stamping die maintenance - rebuilding cutting edges and repairing chips on progressive stamping dies
Die-casting tool restoration - repairing heat checking cracks and erosion on aluminum die-casting tooling
Precision tool repair - repairing cutting tools, gauges, and fixtures made from hardened tool steel
Jewelry and dental welding - fine welding of precious metals and small components

Why Choose Xinhong

Established manufacturer since 2005 - Nearly two decades of fiber laser equipment R&D and production experience.
Genuine IPG/RAYCUS laser sources - 35,000+ hour service life with consistent beam quality for precision micro-welding.
ISO 9001:2015 certified - Every machine is built under ISO 9001:2015 quality management and ships with CE compliance documentation.
Comprehensive after-sales support - Remote diagnostics, spare parts supply, and operator training for international customers.

FAQ

What tool steel grades can this machine repair?

How thin can the weld be?

Can the machine build up worn surfaces?

What training is required for operators?

Is the machine CE certified?

Yes. Xinhong's fiber laser welding machines are CE compliant for European industrial safety standards. Full compliance documentation is provided with every machine.

Need Precision Mold Repair Capability?

Tell us your mold types, tool steel grades, and typical repair scenarios - we'll configure the optimal mold repair laser welding system for your toolroom.

Request a Quote

6:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"CollectionPage\",\"name\":\"tool steel laser repair\",\"description\":\"1 products tagged tool steel laser repair\",\"url\":\"https://www.xinhongcncmachinry.com/product-tag-tool-steel-laser-repair\",\"mainEntity\":{\"@type\":\"ItemList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"url\":\"https://www.xinhongcncmachinry.com/product-precision-mold-repair-fiber-laser-welding-machine\",\"name\":\"Precision Mold Repair Fiber Laser Welding Machine\"}]}}"}}],["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Products\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/products\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"tool steel laser repair\"}]}"}}],["$","$L23",null,{"tagSlug":"tool-steel-laser-repair","tagLabel":"tool steel laser repair","products":[{"__entity":"product","id":"1bfd98fd-daa6-4b3b-b8b0-9e00484fdd88","name":"Precision Mold Repair Fiber Laser Welding Machine","slug":"precision-mold-repair-fiber-laser-welding-machine","categoryId":"0c63b920-3f16-4c65-b375-9688ea1cf38e","categoryName":"Fiber Laser Welding Machines","coverImage":"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/903677c85c6a4556829cfdf2c0ef272b.png","images":["https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/903677c85c6a4556829cfdf2c0ef272b.png"],"alts":{"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/903677c85c6a4556829cfdf2c0ef272b.png":"Precision mold repair fiber laser welding machine with microscope guidance performing micro-weld on steel mold surface"},"charCount":8690,"enoughRichness":true,"description":"$24","processedDescription":"$25","summary":"Precision mold repair fiber laser welding machine with 50x microscope guidance, 0.2mm HAZ, and adjustable pulse energy for repairing injection molds, stamping dies, and hardened tool steel. CE compliant.","specs":[],"brand":"","sku":"","attributes":{},"currency":"USD","priceMin":null,"priceMax":null,"minOrder":null,"tags":["fiber laser welding machine","mold repair laser welding","precision laser micro welding","tool steel laser repair","die maintenance welding machine","fiber laser welding machine mold repair"],"highlights":[],"seoTitle":"Precision Mold Repair Fiber Laser Welding Machine | Xinhong CNC","seoDescription":"Precision mold repair fiber laser welding machine with 50x microscope guidance, 0.2mm HAZ, pulse energy 0.1-50J. For injection molds, stamping dies, and hardened tool steel repair. CE compliant.","seoKeywords":null,"status":"published","sortOrder":0,"isHot":false,"isRecommended":false,"aiGenerated":false,"source":"","lastQcPassed":false,"contentQualityScore":null,"contentQualityCheckedAt":null,"contentQualityActionId":null,"createdAt":"2026-08-14T00:25:33+08:00","updatedAt":"2026-08-25T17:10:51+08:00"}],"locale":"en"}]]