25:I[4298,["/_next/static/chunks/1wga-ezq2f_9u.js","/_next/static/chunks/1391uvikh1lrj.js","/_next/static/chunks/3aprs7_i0cwg_.js","/_next/static/chunks/0789jur78cll3.js","/_next/static/chunks/2magrkn65ldza.js","/_next/static/chunks/3s4um_owbis7m.js"],"TagAggregationClient"] 26:T30f6,

Laser Auxiliary Systems

Laser Cutting Slag Removal System

200 kg/h

Slag Processing Capacity

3–6 m

Conveyor Length

≤65 dB

Noise Level

Auto

Discharge Mode

The Problem with Slag Accumulation

During fiber laser cutting, molten metal and dross drop through the slats of the cutting bed and accumulate underneath. On a high-power machine cutting thick plate, this slag buildup can reach 50–100 kg per shift. If left unmanaged, accumulated slag reduces cutting bed clearance, interferes with the exchange table mechanism, creates fire hazards from hot metal accumulation, and requires time-consuming manual cleaning that takes the machine out of production for 30–60 minutes per day.

Fire and safety hazards: Hot dross particles accumulating under the cutting bed can ignite residual oil or dust. Automated slag removal clears debris continuously, eliminating the fire risk associated with buildup.

Exchange table jamming: Slag accumulation under the bed can obstruct the exchange table shuttle mechanism, causing mechanical jams and damage to the drive system. Continuous removal keeps the shuttle path clear.

Production downtime for manual cleaning: Manual slag clearing requires shutting down the machine, opening the bed panels, and shoveling debris into bins. An automated system handles this without interrupting cutting, recovering 30–60 minutes of production time per day.

Product Overview

This laser cutting slag removal system is installed underneath the cutting bed of fiber laser cutting machines. A heavy-duty auger conveyor or scraper chain runs along the full length of the bed, continuously or periodically transporting slag, dross, and small offcuts from beneath the cutting slats to a collection bin at the end of the conveyor. The system operates automatically, triggered by the cutting machine's PLC based on cutting time or material consumption, and can run during cutting without operator intervention.

Core Features & Advantages

Auger or scraper chain conveyor - A heavy-duty screw auger or scraper chain runs along the bed length, moving slag from under the cutting zone to the discharge point. The auger design handles both fine dross particles and larger offcut pieces without jamming. Hardened steel flighting ensures long service life under abrasive wear.

Automatic PLC-triggered operation - The system runs automatically based on cutting machine signals. It can operate continuously during cutting or on timed intervals (e.g., 5 minutes of conveyor operation every 30 minutes of cutting). The Schneider Electric PLC coordinates with the laser machine controller to prevent operation during exchange table movement.

Slag collection bin with fill sensor - A wheeled collection bin at the discharge point collects removed slag. An ultrasonic fill-level sensor alerts the operator when the bin is 80% full, and the PLC can optionally pause cutting when the bin reaches capacity. Forklift-compatible bin design allows easy emptying.

Water quench option for hot dross - For high-power machines cutting thick plate where dross arrives still molten, a water quench tray at the conveyor inlet cools hot particles before they enter the auger, preventing heat damage to conveyor components and reducing fire risk. The quench water is recirculated through a small reservoir.

Dust-sealed enclosure - The conveyor and collection area are enclosed with dust-sealed panels to prevent fine slag dust from entering the workshop environment. An optional dust extraction port connects to the facility's dust collection system or the laser machine's fume extraction unit.

Technical Specifications

Parameter	Value
Slag Processing Capacity	200 kg/h (continuous operation)
Conveyor Length	3,000–6,000 mm (bed length dependent)
Conveyor Type	Screw auger or scraper chain (model-dependent)
Auger/Chain Motor Power	1.5–4.0 kW (model-dependent)
Conveyor Speed	Adjustable, 0.5–3 m/min
Collection Bin Capacity	150–300 liters (model-dependent)
Fill-Level Sensor	Ultrasonic, 80% alarm threshold
Operation Mode	Continuous / timed interval / PLC-triggered
Control System	Schneider Electric PLC, interlocked with laser machine
Water Quench Option	Available for high-power machines (8,000W+)
Dust Extraction Port	Standard DN150 flange for facility dust collection
Noise Level	≤ 65 dB(A) at 1 m
Power Supply	380V, 3-phase, 50/60Hz
Compatible Machines	Xinhong 2,000W–30,000W fiber laser cutting machines

Application Industries

This slag removal system is essential for fabrication environments with high cutting volume or thick-plate cutting:

Thick plate cutting operations – Carbon steel cutting from 10–30mm where dross generation is significant
High-power cutting (8,000W–30,000W) – High-speed cutting produces large volumes of molten material requiring continuous removal
Multi-shift production lines – Continuous operation where daily manual cleaning would consume significant production time
Automated cutting cells – Lights-out or unattended operation where manual slag clearing is not possible

Why Choose Xinhong

Engineered for Xinhong laser machines – Because Xinhong manufactures fiber laser cutting machines from 2,000W to 30,000W, the slag removal system is designed to match the bed dimensions, exchange table clearance, and PLC interface of each machine model exactly.
Hardened conveyor components – Auger flighting and scraper chain components use hardened steel to withstand abrasive slag wear, extending service intervals and reducing maintenance costs.
Schneider Electric control components – Consistent with the Xinhong product line, the PLC and motor controls use Schneider Electric components for CE/UL compliance.
Established manufacturer since 2005 – Shandong Xinhong CNC Technology Co., Ltd. operates under ISO 9001:2015 quality management certification.

FAQ

Can the slag removal system be installed on an existing Xinhong laser cutting machine?

Yes, the system can be retrofitted to most Xinhong fiber laser cutting machines. The conveyor is designed to fit within the existing machine base footprint. Share your machine model and bed size, and we will confirm the installation requirements.

How often does the collection bin need to be emptied?

Bin capacity ranges from 150–300 liters depending on the model. For a 6,000W machine cutting 8mm carbon steel in a two-shift operation, the bin typically needs emptying once per shift. The fill-level sensor alerts the operator at 80% capacity, and the PLC can optionally pause cutting if the bin is full.

Is the water quench option necessary for my machine?

The water quench option is recommended for machines of 8,000W and above cutting thick plate (10mm+), where molten dross may arrive at the conveyor still hot enough to damage components. For lower-power machines cutting thin sheet, the standard conveyor without quench is typically sufficient.

Does the slag removal system require connection to the machine's dust collection?

The system has a DN150 dust extraction port that can connect to the facility dust collection system or the laser machine's fume extraction unit. While the system is dust-sealed, connecting the extraction port provides additional air quality protection, especially when cutting galvanized or painted materials.

How does the system coordinate with the exchange table?

The slag removal PLC is interlocked with the exchange table mechanism. The conveyor pauses during table exchange to prevent mechanical interference, and resumes after the exchange is complete and cutting resumes. This coordination is automatic and requires no operator input.

Eliminate Slag Buildup and Downtime

Tell us your laser machine model, cutting power, typical material and thickness, and bed size - we'll configure the right slag removal system for your production environment.

Request a Quote

27:T30da,

Laser Auxiliary Systems

Laser Cutting Slag Removal System

200 kg/h

Slag Processing Capacity

3–6 m

Conveyor Length

≤65 dB

Noise Level

Auto

Discharge Mode

The Problem with Slag Accumulation

Product Overview

Core Features & Advantages

Technical Specifications

Parameter	Value
Slag Processing Capacity	200 kg/h (continuous operation)
Conveyor Length	3,000–6,000 mm (bed length dependent)
Conveyor Type	Screw auger or scraper chain (model-dependent)
Auger/Chain Motor Power	1.5–4.0 kW (model-dependent)
Conveyor Speed	Adjustable, 0.5–3 m/min
Collection Bin Capacity	150–300 liters (model-dependent)
Fill-Level Sensor	Ultrasonic, 80% alarm threshold
Operation Mode	Continuous / timed interval / PLC-triggered
Control System	Schneider Electric PLC, interlocked with laser machine
Water Quench Option	Available for high-power machines (8,000W+)
Dust Extraction Port	Standard DN150 flange for facility dust collection
Noise Level	≤ 65 dB(A) at 1 m
Power Supply	380V, 3-phase, 50/60Hz
Compatible Machines	Xinhong 2,000W–30,000W fiber laser cutting machines

Application Industries

This slag removal system is essential for fabrication environments with high cutting volume or thick-plate cutting:

Thick plate cutting operations – Carbon steel cutting from 10–30mm where dross generation is significant
High-power cutting (8,000W–30,000W) – High-speed cutting produces large volumes of molten material requiring continuous removal
Multi-shift production lines – Continuous operation where daily manual cleaning would consume significant production time
Automated cutting cells – Lights-out or unattended operation where manual slag clearing is not possible

Why Choose Xinhong

Engineered for Xinhong laser machines – Because Xinhong manufactures fiber laser cutting machines from 2,000W to 30,000W, the slag removal system is designed to match the bed dimensions, exchange table clearance, and PLC interface of each machine model exactly.
Hardened conveyor components – Auger flighting and scraper chain components use hardened steel to withstand abrasive slag wear, extending service intervals and reducing maintenance costs.
Schneider Electric control components – Consistent with the Xinhong product line, the PLC and motor controls use Schneider Electric components for CE/UL compliance.
Established manufacturer since 2005 – Shandong Xinhong CNC Technology Co., Ltd. operates under ISO 9001:2015 quality management certification.

FAQ

Can the slag removal system be installed on an existing Xinhong laser cutting machine?

How often does the collection bin need to be emptied?

Is the water quench option necessary for my machine?

Does the slag removal system require connection to the machine's dust collection?

How does the system coordinate with the exchange table?

Eliminate Slag Buildup and Downtime

Tell us your laser machine model, cutting power, typical material and thickness, and bed size - we'll configure the right slag removal system for your production environment.

Request a Quote

6:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"CollectionPage\",\"name\":\"automatic dross removal conveyor\",\"description\":\"1 products tagged automatic dross removal conveyor\",\"url\":\"https://www.xinhongcncmachinry.com/product-tag-automatic-dross-removal-conveyor\",\"mainEntity\":{\"@type\":\"ItemList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"url\":\"https://www.xinhongcncmachinry.com/product-laser-cutting-slag-removal-system\",\"name\":\"Laser Cutting Slag Removal System\"}]}}"}}],["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Products\",\"item\":\"https://www.xinhongcncmachinry.com/https://www.xinhongcncmachinry.com/products\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"automatic dross removal conveyor\"}]}"}}],["$","$L25",null,{"tagSlug":"automatic-dross-removal-conveyor","tagLabel":"automatic dross removal conveyor","products":[{"__entity":"product","id":"fa6ffa54-bfce-4a4c-96b8-c245e494d5e0","name":"Laser Cutting Slag Removal System","slug":"laser-cutting-slag-removal-system","categoryId":"cee59952-d87b-4c0b-b2ee-aa7ffc17e3ca","categoryName":"Laser Auxiliary Systems","coverImage":"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/94d0b7d818294e86b5ebf6bca15b036f.png","images":["https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/94d0b7d818294e86b5ebf6bca15b036f.png"],"alts":{"https://assets.wmn.dev/projects/822f8b7b-e34e-4828-9048-a70c41f06a37/ai-team/images/94d0b7d818294e86b5ebf6bca15b036f.png":"Laser Cutting Slag Removal System laser cutting slag removal system"},"charCount":10303,"enoughRichness":true,"description":"$26","processedDescription":"$27","summary":"Automated slag removal system for fiber laser cutting machines. Auger conveyor, 200kg/h capacity, PLC-triggered operation, fill-level sensor, water quench option for high-power machines. Reduces manual cleaning downtime.","specs":[],"brand":"","sku":"","attributes":{},"currency":"USD","priceMin":null,"priceMax":null,"minOrder":null,"tags":["laser cutting slag removal system","laser cutting auxiliary equipment","automatic dross removal conveyor","laser cutter slag conveyor","fiber laser cutting slag management","laser cutting slag removal"],"highlights":[],"seoTitle":"Laser Cutting Slag Removal System | Xinhong CNC","seoDescription":"Automated slag removal system for fiber laser cutting. Auger conveyor, 200kg/h capacity, automatic PLC-triggered operation, collection bin with fill sensor. By Xinhong CNC.","seoKeywords":null,"status":"published","sortOrder":0,"isHot":false,"isRecommended":false,"aiGenerated":false,"source":"","lastQcPassed":false,"contentQualityScore":null,"contentQualityCheckedAt":null,"contentQualityActionId":null,"createdAt":"2026-08-14T00:46:02+08:00","updatedAt":"2026-08-25T17:12:12+08:00"}],"locale":"en"}]]