High-Power Fiber Laser Cutting Machines
Bevel Laser Cutting Solution
One clamping, weld-ready edges: a 3-axis bevel fiber laser tilts +/-45 degrees to cut V, Y, X and K grooves in plate up to 25 mm - replacing grinding and milling in weld preparation.
Request a quoteWeld preparation is the hidden labor line on every thick-plate job
Plates above 12 mm need V, Y, X or K groove edges before welding. Most fabricators still do this with grinding or milling: slow, dusty, operator-dependent, and the angle drifts from drawing with every pass. Each re-cut costs a second handling cycle and pushes delivery out.
How a 3-axis bevel fiber laser solves it
The bevel fiber laser cutting machine tilts its cutting head continuously along the programmed path, so V, Y, X and K grooves come off the bed ready for welding - one clamping, one program, no secondary machining.
| Buyer decision | Grinding / milling | Bevel fiber laser |
|---|---|---|
| Edge consistency | Operator-dependent | Programmed +/-0.5° accuracy |
| Groove geometries | V mainly; K/X slow | V, Y, X, K in one system |
| Throughput | Manual cycle per edge | 8000W continuous CNC path |
Match your requirement to a machine
Single-sided prep, 8000W, bevel accuracy +/-0.5 degrees
View machineApplication case
Thick-plate fabricator moves weld prep in-house after a fiber upgrade
Nordic Precision AB, a European precision workshop, replaced its ageing CO2 cutter with a Xinhong 6000W fiber laser. Per the customer's feedback, cut speed doubled and the edge quality is excellent, with no secondary finishing needed. Data source: recorded customer feedback on the fiber upgrade; bevel capability comes from the bevel machine's published specification (3-axis head, +/-45 degrees, V/Y/X/K grooves, 25 mm carbon steel), which we confirm against your drawings in the quotation.
Application based on customer feedback; individual results depend on materials and production conditions.
Customer ratings
“Cut speed doubled after the fiber upgrade and edges come off ready for welding. Our grinding bay is no longer the bottleneck on thick plate.”
“The 2000W handheld laser welder transformed our kitchen equipment production. Weld seams are clean and the machine paid for itself within six months.”
Certifications & compliance
ISO 9001:2015
Quality management system certified across R&D, production and after-sales service of fiber laser cutting equipment.
CE Marking
Xinhong machines are CE marked for European markets per company records. Request the applicable Declaration of Conformity with your quotation.
Company strength
The factory behind your bevel machine
Related reading
Buyer FAQ
Which groove types can the bevel fiber laser cut?+
The 3-axis head tilts +/-45 degrees and cuts V, Y, X and K groove geometries in carbon steel to 25 mm, so one pass replaces grinding or milling for most weld preparations.
Can I combine straight cutting and beveling in one program?+
Yes. With the tilting head, straight cutting and beveling run on the same 2000x6000 mm bed, so plates do not move between machines and datum alignment is preserved.
Are bevel cutting machines certified for export?+
Yes. All machines are CE marked and the quality system is ISO 9001:2015 certified; the Declaration of Conformity is provided during quotation.
What should I include in a bevel cutting inquiry?+
Send your plate thickness range, groove types (V/Y/X/K), weld standards and monthly tonnage. We confirm the power class, bevel angles and bed size in the quotation.
Request a quotation for this solution
Send your requirement details below - our engineers will confirm the right machine configuration in your quotation.
Bevel Laser Cutting Solution