Shandong Xinhong CNC Technology Co., Ltd
Laser cutting fume extraction and dust removal system with H13 HEPA filtration

Laser Auxiliary Systems

Laser Cutting Fume Extraction and Dust Removal Solution

Fume extraction and dust removal engineered with your laser cutting machine: 3,000-10,000 m3/h, 4-stage H13 HEPA filtration, automatic pulse-jet cleaning and indoor air recirculation.

Request a quote

Extraction is the auxiliary system buyers leave out - until an inspection or a complaint

The pain arrives late

Fume extraction is rarely the first line in a cutting machine RFQ. It surfaces later: visible haze during heavy plate runs, cartridges blinding under carbon steel duty, a landlord complaint about outdoor discharge, or a workplace air review the shop cannot pass. By then the machine is installed and the extraction is retrofitted around it.

What it costs

Manual filter cleaning consumes shift time, haze drives complaints, and failing an air-quality review can stop production entirely. All of it traces back to extraction sized as an afterthought.

Our solution: extraction engineered with the machine

The Xinhong fume extraction and dust removal system is specified against the cutting machines it serves: 3,000-10,000 m3/h suction with a VFD blower, 4-stage filtration with H13 HEPA final stage, automatic pulse-jet cartridge cleaning, and indoor air recirculation for halls where outdoor discharge is not permitted.

How the technology solves it

  • VFD blower matches suction to the duty instead of running flat out.
  • 4-stage filtration ending in H13 HEPA captures the fine fraction laser cutting produces.
  • Pressure-triggered pulse-jet cleaning keeps cartridges online without manual intervention.
  • Integrates with enclosed machines via the laser safety enclosure's extraction ports, and with the slag removal system for bed waste.

Value for the buyer

Air quality is specified in the same quotation as the machine, with capacity, filtration stages and recirculation suitability stated in writing - not discovered during an inspection.

Match your requirement to a machine

Recommended machine
Laser Cutting Fume Extraction & Dust Removal System

4-stage filtration, H13 HEPA, VFD blower, pulse-jet cleaning

View machine

Application case

Two-shift carbon steel shop: cartridges stay online with pulse-jet cleaning

Who: a carbon steel job shop in Central Europe running two shifts on a 6 kW fiber laser, about 20 staff. Machine: Xinhong laser cutting fume extraction and dust removal system, 3,000-10,000 m3/h suction capacity, 4-stage filtration with H13 HEPA and automatic pulse-jet cartridge cleaning. Problem it solved: the shop's first extractor was undersized, and cartridges blinded within weeks under heavy carbon steel duty, forcing manual cleaning and mid-shift stoppages. Before: weekly manual cartridge cleaning, visible haze during 16 mm plate runs, and complaints from neighbouring tenants. Now: pulse-jet cleaning keeps cartridges online automatically and the pressure-triggered cleaning cycle is logged by the system. Where the numbers come from: the extraction product specification (3,000-10,000 m3/h, 4-stage filtration, H13 HEPA, automatic pulse-jet cleaning, VFD blower) and the shop's own maintenance log; cartridge life in their duty cycle is tracked in that log and must be verified per site.

Application based on customer feedback; individual results depend on materials and production conditions.

Shared-hall fabricator: indoor recirculation ends the outdoor discharge conflict

Who: a stainless steel fabrication shop in Western Europe cutting 2-6 mm sheet in a shared production hall where other trades work alongside the laser cell. Machine: Xinhong laser cutting fume extraction and dust removal system, 3,000-10,000 m3/h with H13 HEPA final stage. Problem it solved: the shop's previous open extraction dumped filtered air outdoors, which was neither permitted in winter nor acceptable to the landlord. Before: outdoor discharge with winter heat loss and a building owner complaint. Now: indoor air recirculation through H13 HEPA final filtration, so the hall stays warm and the extraction stays on. Where the numbers come from: the extraction product specification (4-stage filtration with H13 HEPA, 3,000-10,000 m3/h suction, indoor air recirculation) and the building owner's written agreement to recirculation; the air-quality outcome depends on the buyer's hall volume and must be confirmed locally.

Application based on customer feedback; individual results depend on materials and production conditions.

Customer ratings

“Use case: extraction upgrade for a 6 kW fiber laser running two shifts, sourced through a European trading partner. | Assessment: we asked for the filtration stages and cleaning method in writing because our first extractor failed on cartridge life, not on headline airflow. | Verified point: 3,000-10,000 m3/h with H13 HEPA and automatic pulse-jet cleaning per the product record, and manual cartridge cleaning stopped appearing in our maintenance log after commissioning. | Source: maintenance log and commissioning checklist, 2025.”
Works managerTwo-shift carbon steel job shop, Central Europe (anonymised)
“Use case: shared production hall with a no-outdoor-discharge condition from the building owner. | Assessment: recirculation was the requirement that decided the purchase, and we verified it with the landlord before signing. | Verified point: indoor air recirculation through H13 HEPA final filtration as specified, accepted in writing by the building owner. | Source: building owner agreement and Xinhong specification sheet, 2025.”
Facility coordinatorStainless fabrication shop, Western Europe (anonymised)

Certifications & compliance

ISO 9001:2015

ISO 9001:2015

Quality management system certified across R&D, production and after-sales service of fiber laser equipment and auxiliary systems.

CE Marking

Xinhong machines and auxiliary systems are CE marked for European markets per company records. Request the applicable Declaration of Conformity with your quotation.

Company strength

Who builds your extraction system

Founded 2005
Shandong Xinhong CNC Technology Co., Ltd has manufactured fiber laser equipment for two decades.
Factory scale
100-300 employees spanning machining, assembly, quality and service in Shandong Province, China.
R&D capability
Deep expertise in cutting thickness and cutting speed; core technologies developed with IPG (USA), RAYCUS and GW laser sources.
Production capacity
Annual revenue 10-50M USD supporting a 48-model portfolio from 500W to 30000W, including extraction and dust removal auxiliary systems.
Component partners
Schneider Electric electrical control components fitted as standard.
Export markets
Europe and global markets, with CE-compliant export configurations aligned to European workplace air quality requirements.

Machines for this solution

Laser Cutting Fume Extraction & Dust Removal System

Laser Cutting Fume Extraction & Dust Removal System

View machine
Laser Cutting Slag Removal System

Laser Cutting Slag Removal System

View machine
Laser Safety Enclosure & Protective Cabin

Laser Safety Enclosure & Protective Cabin

View machine

Related reading

Buyer FAQ

Why does laser cutting need dedicated fume extraction?+

Laser cutting generates fine metal dust and fume that must be captured at source. Under- or over-sized extraction causes haze, filter blinding and, in enclosed cabins, contamination of optics. European workplace air quality requirements set the benchmark the system is engineered to meet - confirm local limits with your authority.

What extraction capacity does my machine need?+

Per the product specification, the system covers 3,000-10,000 m3/h with a VFD blower. Sizing depends on your machine's bed size and cutting duty - send your machine model and material mix and we will confirm the size in the quotation.

Can the air be recirculated indoors?+

Yes. The specification includes indoor air recirculation through 4-stage filtration with H13 HEPA final stage, designed so filtered air can return to the workshop. Site approval and local air-quality verification remain the buyer's responsibility.

What should I include in an extraction inquiry?+

Send your machine model, materials and thickness mix, shift pattern, hall volume and any landlord or authority constraints. We will confirm capacity, filtration stages and recirculation suitability in the quotation.

Request a quotation for this solution

Send your requirement details below - our engineers will confirm the right machine configuration in your quotation.

Laser Cutting Fume Extraction and Dust Removal Solution

▸ QUOTE REQUEST

FORM · REV.1
Product Inquiry
Laser Cutting Fume Extraction and Dust Removal Solution